Fisher SD Series Snowplow
Fisher SD Series Snowplow
Built to fit a wide range of vehicles and deliver perfect balance of performance and versatility. Available in 6'9" and 7'6" blade widths, these blades are a full 26" high and made of 12 gauge steel. They're equipped with a replaceable polymer cutting edge to improve scraping ability without adding excess weight.
- Minute-Mount 2 System
The simplest and most trouble-free attachment system available. 100% mechanical design means there are no electrical components or hydraulic assist gimmicks to fail. The attachment arms and lower gear are flared both horizontally and vertically to make the drive-in connection easy.
- Moldboard
Available in 6'9" and 7'6" blade widths, these plows are a full 26" high and constructed of 14 gauge steel.
-Chain Lift System
Get instantaneous "float" when lowering the blade, allowing it to freely follow the contours of the plowing surface for a cleaner scrape.
Stack snow higher because you're not restricted by the hydraulic ram stroke.
-Trip Edge Design
When encountering an obstacle only the bottom edge of the blade trips. The rest of the blade stays upright allowing control of the snow on the blade. Fisher trip edge uses compression springs that never need adjustment and are never stretched like extention springs.
-Fast & Durable Hydraulics
Fast responsive hydraulics maximize plowing efficiency. Instead of relying on outside suppliers, Fisher produces all of their hydraulics in-house for unmatched speed and durability.
- Intensifire Lights
State-of-the-art reflector optics provide a smooth wide beam that illuminates the entire plowing surface, with minimal glare above the lamp, especially in a snowstorm. The 1500 hour, long life headlamp bulb minimizes bulb replacement over the life of the lamp. Robust, 2 stud mounting keeps the lamp in its original position, even when subjected to the harshest shock and vibration forces.
- In-Cab Controls
Choose the in-cab control that's right for you - the hand-held Fish-Stik control with power "on" and "float" LED and automatic shut-off or the compact solenoid control.
Blade Blade Blade Trip Ribs Angling Plowing Weight
Width Height Gauge Springs Rams Width (approx)
---------------------------------------------------------------------------------------------------------------
6'9" SD 26" 14 2 8 1 1/2"x 10" 6'1" * 472 lbs.
7'6" SD 26" 14 2 8 1 1/2"x 10" 6'9" 487 lbs.
- Commercial Blade Guide Kit - Flourescent orange, 24" long and made of 3/4" thick nylon tubing.
- Curb Guard Kit - Protect the outer edges of your snowplow from the wear and tear of sidewalks and curbs with this simple bolt-on curb guard kit.
- Rubber Deflector -Made of 2-ply rubber, this deflector keeps snow off your windshield while plowing.
- Shoe Kit - Cast iron shoes reduce wear of the cutting edge and base angle.
-Plow Parka - This plow cover protects your plow's hydraulic and electric systems.
- Steel Cutting Edge - These replaceable cutting edges reduce wear and improve cutting power and scraping ability.